Heavy Duty Lathe
At Nikhil Lathe
| SR NO | PARTS | SPECIFICATION | NH-1 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 5 1/2' (1675) 13" (330) 6" (150) 8" (205) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (255) 19.5" (495) 12" (305) 31" (790) 21.37" (542) 12" (305) 5" (125) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI 55" MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2.25 (57) MT-4 7" (178) |
| 5 | SPEED | No. of Speed RPM Low & High | 8 28 to 530 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 38 mm |
| 7 | ELECTRIC | Motor Power | 3 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | C-68 B-72 |
| 9 | GENERAL | Floor Space (LxWxH) | 6.5' x 3.5' x 4.5' |
| SR NO | PARTS | SPECIFICATION | NH-2 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 7' (2135) 13" (330) 6" (150) 8" (205) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (255) 19.5" (495) 12" (305) 31" (790) 21.37" (542) 12" (305) 5" (125) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI 55" MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2.25 (57) MT-4 7" (178) |
| 5 | SPEED | No. of Speed RPM Low & High | 8 28 to 530 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 38 mm |
| 7 | ELECTRIC | Motor Power | 3 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | C-68 B-72 |
| 9 | GENERAL | Floor Space (LxWxH) | 8' x 3.5' x 4.5' |
| SR NO | PARTS | SPECIFICATION | NH-3 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 9' (2745) 13" (330) 6" (150) 8" (205) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (255) 19.5" (495) 12" (305) 31" (790) 21.37" (542) 12" (305) 5" (125) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI 55" MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2.25 (57) MT-4 7" (178) |
| 5 | SPEED | No. of Speed RPM Low & High | 8 28 to 530 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 38 mm |
| 7 | ELECTRIC | Motor Power | 3 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | C-68 B-72 |
| 9 | GENERAL | Floor Space (LxWxH) | 10' x 3.5' x 4.5' |
| SR NO | PARTS | SPECIFICATION | NH-4 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 10' (3040) 13" (330) 6" (150) 8" (205) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (255) 19.5" (495) 12" (305) 31" (790) 21.37" (542) 12" (305) 5" (125) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI 55" MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2.25 (57) MT-4 7" (178) |
| 5 | SPEED | No. of Speed RPM Low & High | 8 28 to 530 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 38 mm |
| 7 | ELECTRIC | Motor Power | 5 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | C-68 B-72 |
| 9 | GENERAL | Floor Space (LxWxH) | 11' x 3.5' x 4.5' |
| SR NO | PARTS | SPECIFICATION | NH-5 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 12' (3655) 13" (330) 6" (150) 8" (205) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (255) 19.5" (495) 12" (305) 31" (790) 21.37" (542) 12" (305) 5" (125) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI 55" MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2.25 (57) MT-4 7" (178) |
| 5 | SPEED | No. of Speed RPM Low & High | 8 28 to 530 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 38 mm |
| 7 | ELECTRIC | Motor Power | 5 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | C-68 B-72 |
| 9 | GENERAL | Floor Space (LxWxH) | 13' x 3.5' x 4.5' |
| SR NO | PARTS | SPECIFICATION | NH-6 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 14' (4270) 13" (330) 6" (150) 8" (205) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (255) 19.5" (495) 12" (305) 31" (790) 21.37" (542) 12" (305) 5" (125) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI 55" MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2.25 (57) MT-4 7" (178) |
| 5 | SPEED | No. of Speed RPM Low & High | 8 28 to 530 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 38 mm |
| 7 | ELECTRIC | Motor Power | 5 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | C-68 B-72 |
| 9 | GENERAL | Floor Space (LxWxH) | 15' x 3.5' x 4.5' |
| SR NO | PARTS | SPECIFICATION | NH-7 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 16' (4875) 13" (330) 6" (150) 8" (205) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (255) 19.5" (495) 12" (305) 31" (790) 21.37" (542) 12" (305) 5" (125) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI 55" MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2.25 (57) MT-4 7" (178) |
| 5 | SPEED | No. of Speed RPM Low & High | 8 28 to 530 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 38 mm |
| 7 | ELECTRIC | Motor Power | 5 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | C-68 B-72 |
| 9 | GENERAL | Floor Space (LxWxH) | 17' x 3.5' x 4.5' |
EXPERIENCE
0
+
MACHINES INSTALLED
786
+
MACHINES INSTALLED
4
+