Medium Duty Lathe
At Nikhil Lathe
| SR NO | PARTS | SPECIFICATION | NH-1 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 4 1/2' (1675) 11" (280) 4.5" (115) 5" (130) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (254) 19.5" (495) 12" (305) 27" (685) 20" (500) 12.5" (320) 5.5" (140) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI | 95 x 6 TPI 55 & 80 MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2" (50.8) MT-4 5" (130) |
| 5 | SPEED | No. of Speed RPM Low & High | 6 40 to 470 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 32 mm |
| 7 | ELECTRIC | Motor Power | 2 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | B-50 B-57 |
| 9 | GENERAL | Floor Space (LxWxH) | 56" x 40"' x 55" |
| SR NO | PARTS | SPECIFICATION | NH-2 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 5 1/4' (2135) 11" (280) 4.5" (115) 5" (130) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (254) 19.5" (495) 12" (305) 27" (685) 32" (805) 12.5" (320) 5.5" (140) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI | 95 x 6 TPI 55 & 80 MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2" (50.8) MT-4 5" (130) |
| 5 | SPEED | No. of Speed RPM Low & High | 6 40 to 470 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 32 mm |
| 7 | ELECTRIC | Motor Power | 2 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | B-50 B-57 |
| 9 | GENERAL | Floor Space (LxWxH) | 68" x 40"' x 55" |
| SR NO | PARTS | SPECIFICATION | NH-3 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 6' (2745) 11" (280) 4.5" (115) 5" (130) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (254) 19.5" (495) 12" (305) 27" (685) 38" (950) 12.5" (320) 5.5" (140) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI | 95 x 6 TPI 55 & 80 MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2" (50.8) MT-4 5" (130) |
| 5 | SPEED | No. of Speed RPM Low & High | 6 40 to 470 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 32 mm |
| 7 | ELECTRIC | Motor Power | 2 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | B-50 B-57 |
| 9 | GENERAL | Floor Space (LxWxH) | 74" x 40"' x 55" |
| SR NO | PARTS | SPECIFICATION | NH-4 |
|---|---|---|---|
| 1 | BED | Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate | 7' (3040) 11" (280) 4.5" (115) 5" (130) |
| 2 | CAPACITY | Height of Center Swing Over Bed Swing Over Cross Slide Swing in Gap Admit Between Center Movement of Cross Slide Movement of Comp Slide | 10" (254) 19.5" (495) 12" (305) 27" (685) 50" (1255) 12.5" (320) 5.5" (140) |
| 3 | MAIN SPINDLE | Spindle Nose Spindle Bore Tapper Bore | 75mm x 6 TPI | 95 x 6 TPI 55 & 80 MT-6 |
| 4 | TAIL STOCK SPINDLE | Diameter Morse Tapper Travel | 2" (50.8) MT-4 5" (130) |
| 5 | SPEED | No. of Speed RPM Low & High | 6 40 to 470 |
| 6 | THREADS | Metric Thread Inch Thread Lead Screw Diameter | 1 to 6 (13) 2 to 24 (19) 32 mm |
| 7 | ELECTRIC | Motor Power | 2 H.P. III |
| 8 | DRIVE | Counter to Spindle Counter to Motor | B-50 B-57 |
| 9 | GENERAL | Floor Space (LxWxH) | 86" x 40"' x 55" |
EXPERIENCE
0
+
MACHINES INSTALLED
786
+
MACHINES INSTALLED
4
+