Light Duty Lathe Machine :

• Technical Specification :

• Parts	Specification	NL-1	NL-2	NL-3
  Bed	Length of Bed	4 ½’ (1372)	5 ½’ (1676)	6’ (1830)
  	Width of Bed	9 ½” (240)	9 ½” (240)	9 ½” (240)
  	Length of Gap	4” (120)	4” (120)	4” (120)
  	Length of Gap in Front of Face Plate	4.5” (115)	4.5” (115)	4.5” (115)
  Capacity	Hight of Centre	7” (177)	7” (177)	7” (177)
  	Swing over Bed	13.5” (343)	13.5” (343)	13.5” (343)
  	Swing over Cross Slide	7.75” (200)	7.75” (200)	7.75” (200)
  	Swing in Gap	21” (535)	21” (535)	21” (535)
  	Admit between Center	29” (740)	37” (960)	46” (1190)
  	Movement of Cross Slide	7” (178)	7” (178)	7” (178)
  	Movement of Comp. Slide	4.75” (120)	4.75” (120)	4.75” (120)
  Main Spindle	Spindle Nose	60mm x 8 TPI	60mm x 8 TPI	60mm x 8 TPI
  	Spindle Bore	1.5 (40)	1.5 (40)	1.5 (40)
  	Tapper Bore	MT - 5	MT - 5	MT - 5
  Tail Stock Spindle	Diameter	1.5 (38.1)	1.5 (38.1)	1.5 (38.1)
  	Morse Tapper	MT - 3	MT - 3	MT - 3
  	Travel	4.75 (120)	4.75 (120)	4.75 (120)
  Speed	No. of Speed	8	8	8
  	RPM Low & High	40 to 950	40 to 950	40 to 950
  Threads	Metric Thread	1 to 6 (13)	1 to 6 (13)	1 to 6 (13)
  	Inch Thread	2 to 24 (19)	2 to 24 (19)	2 to 24 (19)
  	Lead Screw Dia.	1" (25.4)	1" (25.4)	1" (25.4)
  Electric	Motor Power	1 H.P III	1 H.P III	1 H.P III
  Drive	Counter to Spindle	B -42	B -42	B -42
  	Counter to Motor	B -53	B -53	B -53
  General	Floor Space (LxWxH)	56" x 16" x 52"	65" x 16" x 52"	74" x 16" x 52”

 

• Standard Accessories :Change Gear Box
  Chuck Plate
  Spindle Sleeve
  Dead Center (2 Nos.)
  Tool Post Key
  Motor Pully

• Extra Accessories :Face Plate
  Steady Rest
  Follow Rest
  Water Guard
  Dog & True Chuck
  Electric Motor
  Coolant Pump Tank
  Norton Gear Box
  Tapper Turning Attachment
  Rear Tool-post

• Speciality :Harden Bed (391 BHN)
  SKF or Timken Make Bearing*
  Tailstock Spindle Harden
  Appron with Bushing
  6” Heavy Cross Slide
  4” x 4” Tool Post
  Square Headstock
  Tray with Tool-Box (with lock & Key)
  Heavy Double & Change Grears